TiN Coated Jobber Drill 7.8mm

M2 HSS
$12.90
In stock
SKU
DJ78TN

The fluted form, web thickness and split point of the standard Alpha drills are suitable for most materials forming fine chips. The rigidity of the drill and workpiece is most important for effective drilling. The shorter the flute length the more rigid the drill. Long drills must be adequately supported to reduce vibration.

 

• M2 HSS Fully ground M2 HSS material increases drill life

• Titanium Nitride coating reduces heat and increases lubricity for extended life

• 135º Split Point cuts faster and reduces wandering

 

The following are important in drill use:

• Clamp the workpiece securely

• Select the correct speed and feed

• Use an appropriate coolant or lubricant

• Ensure the shank is securely held. Avoid using worn drill chucks as the drill may slip during use.

• Regrind the point or replace the drill before it dulls, do not force a worn drill.

• When deep hole drilling, withdraw frequently to clear the chips (deep holes start at 4X the diameter)

• For stainless steel, manganese and high tensile steels, do not allow the drill to swell as it will cause work-hardening. Use a slower speed and heavier feed for these materials.

Click Here For Specifications
Cutting Length 75mm
Diameter 7.8mm
Overall Length 117mm
Shank Size 7.8mm
Shank Type Cylindrical
Tool Material M2 HSS
Brand Alpha
Wishlist Add to Wish List
We found other products you might like!